1. With the new cutting device, the cutter can be cut bilaterally, and the cutter disc and the fixed cutter always fit together, reducing the number of fixed cutter replacement, saving cost and improving cutting efficiency.
2. When pulling cloth, with the increase of layers, the stacking height of cloth increases, the platform will automatically drop according to the height, and always keep the same height as the outlet.
3. The utility model can turn the hopper to facilitate feeding and reduce labor intensity.
4. The upper cloth and cloth feeding mechanism adopts servo motor to control precisely.
5. The cloth roll is supported by air expanding rollers to prevent the cloth roll from jumping from left to right, and to speed up the cloth loading speed and improve the efficiency.;
6. The single automatic cloth spreading device solves the problem of manual cloth loading for heavy weight cloth rolling.;
7. Adopt the cylinder type advanced opposite side mode, can carry on the opposite side to the big weight cloth roll, the error control is below 5mm.
8. The cloth buffer mechanism adopts multi-point sensor monitoring to ensure adequate buffer distribution.
9. The detection of material remainder can set the percentage of early warning according to need, and warn when setting the value.
10. Defect Monitoring Device: Red or yellow stickers should be pasted on the edge of the fabric defective area for defect marking. The equipment will automatically cut the defective area and not use it.
